Concrete Driveways
For durable and sturdy concreting driveways, patios and paths, contact Brisbane Concreting Pros today!
Learn More →
Sick of plain old grey? Coloured Concrete can add a touch of fun to paths, patios and driveways without compromising its strength and performance. Contact Brisbane Concreting Pros today!
Request a Free Quote
You've just had the house rendered or put on a new roof, and now that plain grey slab out front looks like an afterthought instead of part of the plan. It happens all the time. A driveway or path poured in standard grey concrete can clash with a home's colour scheme, especially once landscaping and paint are finished. Coloured concrete fixes that mismatch, giving you a finish that ties in with brickwork, render tones or roof colour instead of fighting against it. Brisbane Concreting Pros handles coloured concrete Brisbane wide, from small entry paths to full driveway replacements.
There are two ways we get colour into a slab, and which one suits your job depends on the look and wear you're after. Integral colour means the oxide pigment goes into the mix at the batching stage, so the tone runs consistently through the whole slab, not just the top layer - handy if the surface ever gets scratched or chipped down the track. Colour hardener works differently: it's a dry-shake product broadcast onto the fresh concrete and floated into the surface, which builds a denser, more wear-resistant top layer with richer, more saturated colour options. Brisbane's summer sun is hard on poorly pigmented concrete - cheap oxides can fade or go patchy under sustained UV - so we use quality pigments and pair them with a sealer suited to our humid, storm-heavy wet season. That sealer choice also affects slip resistance, which matters on pool surrounds and alfresco patios where things get wet and bare feet are common.
We do this work right across the Brisbane area, in older suburbs full of Queenslander timber homes and newer brick-and-render estates alike - stained concrete pathways, garden edging, pool surrounds and alfresco patios all help pull a street-facing property together. If you're weighing up a plain pour against something with more character, it's worth reading up on concrete driveways before deciding, since the base prep is similar either way and colour is really a finishing decision. We quote everything from a small pathway patch to a complete driveway repour, so get in touch for a job-specific price rather than guessing off a generic rate card. Learn more about all our concreting services in Brisbane on our home page.
How our team completes your service
We excavate to the correct depth and compact the base material properly, which matters more here than most places because Brisbane's reactive clay soils shift with the wet-dry cycle and can crack or blotch a coloured slab if the base isn't solid. Timber or steel formwork goes in next, set to the right falls so water sheds away from the house instead of pooling on your new patio or driveway.
Depending on the look you're after, we either batch integral oxide pigment straight into the concrete truck at an agreed ratio for consistent colour right through the slab, or pour a standard grey mix and broadcast dry colour hardener by hand once the bleed water has disappeared from the surface. Both methods produce reliable tinted concrete, but each suits different budgets and finishes.
We bull float the slab first, then hand trowel to work the colour hardener evenly into the surface so there are no patchy spots once it cures. If you've asked for a stamped pattern or textured finish, this is the stage we press it in, and we cut control joints while the concrete is still workable to manage cracking as it sets.
The slab needs proper time to cure before we touch it again, since sealing too early can trap moisture and dull the colour. Once cured, we apply a penetrating or film-forming sealer chosen for Brisbane's UV exposure, which locks in the pigment and gives your decorative concrete driveway or patio its final sheen and long-term protection against fading.
Professional care for your property
A plain grey slab can fight against red brick, rendered walls or dark roof tiles instead of working with them. Tinted concrete lets you pick a tone that ties your driveway, path or patio into the rest of the property, whether that's a soft sandstone hue or a deeper charcoal to match window frames. It's a small decision that makes a big difference if you're proud of the place or getting ready to sell.
Pavers shift, crack at the joints and need re-grouting over time. Pigmented concrete goes down as a single reinforced pour, so the colour is part of the slab itself, not a surface treatment that wears off. You get the decorative finish without adding another maintenance job to your weekend list.
Stark white concrete around a pool or alfresco area can throw back a lot of glare on a bright Brisbane afternoon. Earthy or mid-toned dyed concrete cuts that reflection and stays more comfortable to walk on barefoot when the sun's belting down. It's a practical fix as much as a style choice for anyone using their outdoor space through summer.
Our team provides coloured concrete focused on your property and priorities.
We make it easy to ask questions, request a quote, and plan the work.
We explain the proposed work so you know what the quote covers.
Common questions answered
Yes, our team provides professional coloured concrete across Brisbane and nearby areas.
Use the quote form to tell us about your property and the work you need.
Our team will discuss the project with you, assess the work, and provide a quote before service begins.
We provide Coloured Concrete throughout Brisbane and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All Areas